AUTO-Up Feature With Anti-Pinch Protection — If Equipped

Lift the window switch to the second detent, release, and the window will go up automatically.

To stop the window from going all the way up during the AUTO-up operation, push down on the switch briefly.

To close the window part way, lift the window switch to the first detent and release it when you want the window to stop.

NOTE:
• If the window runs into any obstacle during autoclosure, it will reverse direction and then go back down. Remove the obstacle and use the window switch again to close the window.
• Any impact due to rough road conditions may trigger the auto-reverse function unexpectedly during autoclosure.
If this happens, pull the switch lightly to the first detent and hold to close the window manually.

WARNING!
There is no anti-pinch protection when the window is almost closed. Be sure to clear all objects from the window before closing.

    See also:

    Programming A Non-Rolling Code
    For programming Garage Door Openers manufactured before 1995. 1. Turn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink ...

    2011 Chrysler 200 Convertible: First Drive
    Automotive Lease Guide reports that nearly one out of every two Chryslers sold in 2010 went to rental-fleet companies, which is nearly triple the average for non-luxury brands. No doubt the automa ...

    Lap/Shoulder Belt Untwisting Procedure
    1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, next to your arm. Grasp the latch plate and pull out the ...