EVIC Amber Telltales

This area will show reconfigurable amber caution telltales.

These telltales include:

• Forward Collision Warning (FCW) OFF

This telltale informs the driver that the Forward

This telltale informs the driver that the Forward Collision Warning feature is Off. The telltale is On when the front radar sensor is blocked and requires cleaning, the ACC/FCW sensors require service, or the ACC/FCW system is unavailable because of a system error. For further information, refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your Vehicle.”

• Low Fuel Telltale

When the fuel level reaches approximately 3.0 gal

When the fuel level reaches approximately 3.0 gal (11.0 L) this light will turn on, and remain on until fuel is added.

• Windshield Washer Fluid Low Indicator

This telltale will turn on to indicate the windshield

This telltale will turn on to indicate the windshield washer fluid is low.

• Adaptive Cruise Control (ACC) Malfunction

This light will turn on when a ACC is not

This light will turn on when a ACC is not operating and needs service. For further information, refer to “Adaptive Cruise Control (ACC)” in “Understanding The Features Of Your Vehicle.”

• SERV AWD (Service All Wheel Drive) Indicator

This light will turn on when the All Wheel

This light will turn on when the All Wheel Drive feature requires service. For further information, refer to “All Wheel Drive” in “Starting And Operating.”

    See also:

    Gross Axle Weight Rating (GAWR)
    The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Ve ...

    Occupant Restraint Controller (ORC)
    The ORC is part of a Federally regulated safety system required for this vehicle. The ORC determines if deployment of the front and/or side air bags in a frontal or side collision is required. B ...

    Station List Menu
    When listening to Satellite audio, pressing the remote control’s MENU button displays a list of all available channels. Navigate this list using the remote control’s navigation buttons ( , ...