Front Turn Signal


 

1. Raise and prop open the hood.

2. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the headlamp housing.

3. Remove the bulb from the connector socket and install the replacement bulb.

4. Install the bulb and connector assembly into the headlamp housing and rotate the connector one-quarter turn clockwise to lock it in place.

    See also:

    Traction
    When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is known as hydroplaning and may cause partial or complete loss of ve ...

    Before You Begin Programming HomeLink
    Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmission of the radio-frequency signal it is recommended th ...

    LED the Way
    The new 300 is a bit larger than its predecessor — about 2 inches longer and an inch wider — but has the same squared-off stance, tall grille and upright taillights. Most of the details have b ...