Cleaning The Instrument Panel Cupholders
Removal
Pull the flexible liner from the cupholder drawer starting at one edge to ease removal.
Cleaning
The liner is top shelf dishwasher safe, or you may follow the cleaning procedure below.
Soak the liner in a mixture of medium hot tap water and one teaspoon of mild liquid dish soap. Let soak for approximately 30 minutes. After 30 minutes, pull the liner from the water and dip it back into the water about six times. This will loosen any remaining debris. Rinse the liner thoroughly under warm running water. Shake the excess water from the liner and dry the outer surfaces with a clean soft cloth.
Installation
Place the liner into the cupholder drawer and press the liner into place so that the retention tabs seat into the corresponding openings in the drawer.
See also:
Customer Key Programming
You can program new keys to the system if you have two
valid Sentry Keys by performing the following procedure:
1. Cut the additional Sentry Key Transponder blank(s)
to match the ignition switch ...
Unlock Doors Automatically On Exit — If Equipped
The Unlock Doors Automatically On Exit feature unlocks
all of the vehicle doors when any door is opened. This
will occur only after the shift lever has been shifted into
the PARK position, after ...
Super Console — If Equipped
On models equipped with the Super Console, there are
two cupholders located in the center of the console.
Super Console Cupholders
For rear passengers two cupholders are located in the
pull-ou ...