Auto Window Up With Anti-Pinch Protection — If Equipped

Lift the window switch fully upward to the second detent, release, and the window will go up automatically.

To cancel the Auto Up movement, operate the switch either in the up or down direction and release the switch.

To close the window part way, lift the window switch to the first detent and release it when you want the window to stop.

NOTE:
• If the window runs into any obstacle during autoclosure, anti-pinch protection will reverse the window direction and then go back down. Remove the obstacle and use the window switch again to close the window.

• Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during autoclosure.

If this happens, pull the switch lightly to the first detent and hold to close window manually.

WARNING!
When the window is almost closed, there is no anti-pinch protection. To avoid personal injury, be sure to clear your arms, hands, fingers and all objects from the window path before closing.

Reset Auto Up

Anytime the vehicle battery goes dead, the Auto Up function will be disabled. To reactivate the Auto Up feature, pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.

    See also:

    Fluid Level Check
    Regular automatic transmission fluid level checks are not required. For this reason, the dipstick is omitted. If you notice fluid loss or transmission malfunction, have your authorized dealer che ...

    Emergency And Towing Assistance
    The Emergency and Towing Favorite numbers can only be altered. These cannot be deleted and the names cannot be changed. To change the Emergency or Towing number follow these steps. • Touch t ...

    After Starting
    The idle speed is controlled automatically and it will decrease as the engine warms up. ...