Cooling System – Drain, Flush, And Refill

If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze) solution.

Refer to the “Maintenance Schedule” for the proper maintenance intervals.

    See also:

    Vehicles Equipped With Wheel Covers
    1. Mount the road tire on the axle. 2. To ease the installation process for steel wheels with wheel covers, install two lug nuts on the mounting studs which are on each side of the valve stem. In ...

    Satellite Radio
    To switch to satellite radio mode, say “Sat” or “Satellite Radio”. In this mode, you may say the following commands: • “Channel Number” (to change the channel by its spoken number) ...

    After Starting
    The idle speed is controlled automatically and it will decrease as the engine warms up. ...