Shift Lever Override

If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can use the following procedure to temporarily move the shift lever:

1. Firmly apply the parking brake.

2. Remove the cupholder liner.

3. Turn the ignition to the ON/RUN position without starting the engine.

4. Press and maintain firm pressure on the brake pedal.

5. Insert a screwdriver or similar tool into the hole at the front of the cupholder and push and hold the override lever forward.

6. Move the shift lever into the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.

8. Reinstall the cupholder liner.

    See also:

    Jacking And Tire Changing
    WARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changin ...

    Media Center 130 With Satellite Radio (Sales Code RES+RSC)
    NOTE: The radio sales code is located on the lower right side of the radio faceplate. Media Center 130 (RES/RSC) ...

    Windshield Wipers And Washers
    The wipers and washers are operated by a switch within the multifunction lever. Rotate the end of the multifunction lever to select the desired wiper speed. NOTE: Always remove any buildup of sn ...