Brake/Transmission Interlock System

This vehicle is equipped with a Brake Transmission Shift Interlock (BTSI) that holds the shift lever in the PARK position unless the brakes are applied. To move the shift lever out of the PARK position, the ignition switch must be turned to the ON/RUN or START position (engine running or not) and the brake pedal must be pressed.

    See also:

    To Vary The Speed Setting
    When the Electronic Speed Control is set, you can increase speed by pushing the RES (+) button. If the button is continually pressed, the set speed will continue to increase until the button is ...

    Auto-On Comfort & Remote Start
    After pressing the Auto-On Comfort & Remote Start soft-key the following settings will be available. • Horn With Remote Start When this feature is selected, the horn will sound when the re ...

    Removing Key Fob From Ignition
    Place the shift lever in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. NOTE: Power window switches will also remain active for up to 90 seconds after the ignition switc ...