Auto Up Reset — If Equipped
To reactivate the Auto Up feature, perform the following steps after vehicle power is restored:
1. Pull the window switch up to close the window completely and continue to hold the switch up for an additional two seconds after the window is closed.
2. Push the window switch down firmly to the second detent to open the window completely and continue to hold the switch down for an additional two seconds after the window is fully open.
See also:
Brake/Transmission Shift Interlock System
This vehicle is equipped with a Brake Transmission Shift
Interlock System (BTSI) that holds the shift lever in the
PARK position unless the brakes are applied. To move
the shift lever out of the ...
Select Another Mobile Phone
This feature allows you to select and start using another
phone paired with the Uconnect™ Phone.
• Press the button to begin.
• After the “Ready” prompt and the following beep, say
...
LOW
This range should be used for engine braking when
descending very steep grades. In this range, the transmission
will downshift for maximum engine braking,
and upshifts will occur only to prevent ...