ENGINE START/STOP Button Functions – With Driver’s Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position)

Chrysler 300 / Chrysler 300 Owners Manual / Starting And Operating / Starting Procedures / Normal Starting / ENGINE START/STOP Button Functions – With Driver’s Foot OFF The Brake Pedal (In PARK Or NEUTRAL Position)

 

The Keyless Enter-N-Go feature operates similar to an ignition switch. It has four positions, OFF, ACC, RUN and START. To change the ignition switch positions without starting the vehicle and use the accessories follow these steps.

• Starting with the ignition switch in the OFF position:

• Press the ENGINE START/STOP button once to change the ignition switch to the ACC position (EVIC displays “ACC”), • Press the ENGINE START/STOP button a second time to change the ignition switch to the RUN position (EVIC displays “RUN”), • Press the ENGINE START/STOP button a third time to return the ignition switch to the OFF position (EVIC displays “OFF”).

    See also:

    Power Steering Fluid Check
    Checking the power steering fluid level at a defined service interval is not required. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is ...

    Steering Wheel Audio Controls — If Equipped
    Remote Sound System Controls (Back View Of Steering Wheel) The remote sound system controls are located on the rear surface of the steering wheel, at the three and nine o’clock positions. Th ...

    Mode Control (Air Direction)
    Rotate this control to choose from several patterns of air distribution. You can select either a primary mode as identified by the symbols on the control, or a blend of two of these modes. ...