Pair Additional Mobile Phones

• Touch the “More” soft-key to begin,
• Touch the “Settings” soft-key,
• Next, touch the “Phone/Bluetooth ” soft-key,
• Touch the “Add Device” soft-key,
• Search for available devices on your Bluetooth enabled mobile phone. When prompted on the phone, enter the name and PIN shown on the Uconnect Touch™ screen,
• Uconnect™ Phone will display an in process screen while the system is connecting,
• When the pairing process has successfully completed, the system will prompt you to choose whether or not this is your favorite phone. Selecting Yes will make this phone the highest priority. This phone will take precedence over other paired phones within range.

NOTE:

NOTE:
For phones which are not made a favorite, the phone priority is determined by the order in which it was paired. The latest phone paired will have the higher priority.

You can also use the following VR commands to bring up the Paired Phone screen from any screen on the radio:
• “Show Paired Phones” or
• “Connect My Phone”

    See also:

    Standard Low Beam Headlamp, High Beam Headlamp, Park/Turn Lamp, Inner Park Lamp, And Outer Park Lamp
    1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlamp assembly on the driver side of the vehicle. 2. Twist the appropriate ...

    Adding Washer Fluid
    The windshield washer fluid reservoir is located in the front of the engine compartment. Be sure to check the fluid level at regular intervals. Fill the reservoir with windshield washer solvent ...

    Changing FCW Status
    The FCW feature can be set to far, set to near or turned off using the Uconnect Touch™ System, refer to “Uconnect Touch™ Settings” in “Understanding Your Instrument Panel” for furthe ...