To Turn Off

The system will turn off and erase the set speed in memory if:
• You push and release the ON/OFF button.
• You turn OFF the ignition.

    See also:

    What Causes Corrosion?
    Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt, and moisture accumulation. • Stone and ...

    To Vary The Speed Setting
    There are two ways to change the set speed: • Use the accelerator pedal to adjust the vehicle to the desired speed and press the SET - button. • Tap the RES + or SET - button to increase or de ...

    Gross Axle Weight Rating (GAWR)
    The GAWR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly. Make sure that you do not exceed either front or rear GAWR. Refer to “Ve ...