Place/Retrieve A Call From Hold

During an active call, touch the “Hold” soft-key on the Phone main screen.

    See also:

    Vehicles Not Equipped With Keyless Enter-N-Go
    1. Turn the ignition switch to the ON/RUN position (Do not start the engine.) 2. Fully depress the accelerator pedal, slowly, three times within 10 seconds. 3. Turn the ignition switch to the O ...

    High/Low Beam Switch
    When the headlights are turned on, pushing the multifunction lever toward the instrument panel will switch from low beams to high beams. Pulling back to the neutral position returns the headligh ...

    Jump-Starting Procedure
    If your vehicle has a discharged battery it can be jumpstarted using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dan ...