AUTO-Up Feature With Anti-Pinch Protection — If Equipped
Lift the window switch to the second detent, release, and the window will go up automatically.
To stop the window from going all the way up during the AUTO-up operation, push down on the switch briefly.
To close the window part way, lift the window switch to the first detent and release it when you want the window to stop.
NOTE:
• If the window runs into any obstacle during autoclosure,
it will reverse direction and then go back
down. Remove the obstacle and use the window
switch again to close the window.
• Any impact due to rough road conditions may trigger
the auto-reverse function unexpectedly during autoclosure.
If this happens, pull the switch lightly to the
first detent and hold to close the window manually.
WARNING!
There is no anti-pinch protection when the window
is almost closed. Be sure to clear all objects from the
window before closing.
See also:
Radial-Ply Tires
WARNING!
Combining radial ply tires with other types of tires
on your vehicle will cause your vehicle to handle
poorly. The instability could cause a collision. Always
use radial ply tires in s ...
Removing Key Fob From Ignition
Place the shift lever in PARK. Turn the Key Fob to the
OFF position and then remove the Key Fob.
NOTE:
Power window switches will also remain active
for up to 90 seconds after the ignition switc ...
Disabling/Enabling HSA
If you wish to turn on or off the HSA system, it can be
done using the Customer Programmable Features in the
Electronic Vehicle Information Center (EVIC). Refer to
“Electronic Vehicle Informat ...