See also:

Front Turn Signal
1. Raise and prop open the hood. 2. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the headlamp housing. 3. Remove the bulb from the connector sock ...

Dial By Saying A Number
• Press the button to begin, • After the “Listening” prompt and the following beep, say “Dial 248-555-1212”, • The Uconnect™ Phone will dial the number 248-555-1212. ...

Rear Tail, Stop, Turn Signal, Side Marker And Backup Lamp
1. Raise the liftgate. 2. Remove the tail lamp assembly by removing the two screws from the inboard side. Use a fiber stick or similar tool to gently pry the light on the outboard side to disen ...