License Lamp
The license plate lamp is located under the tailgate light bar and above the license plate.
1. Using a small screwdriver, press inward the locking tab on the outboard side of the lamp assembly and pull down on the lamp assembly for removal.
2. Twist and remove the socket from the lamp assembly and pull the bulb out to remove.
3. Push the bulb into the socket, twist the socket into the lamp assembly and reinstall the lamp assembly into place ensuring the locking tab is secure.
See also:
Premium System – If Equipped
The TPMS uses wireless technology with wheel rimmounted
electronic sensors to monitor tire pressure levels.
Sensors mounted to each wheel as part of the valve
stem transmit tire pressure readings ...
Customer Programmable Features — Uconnect Touch™ System 8.4 Settings
Press the More soft-key, then press the Settings soft-key
to display the menu setting screen. In this mode the
Uconnect Touch™ system allows you to access programmable
features that may be equ ...
Winter Operation
To ensure the best possible heater and defroster performance,
make sure the engine cooling system is functioning
properly and the proper amount, type, and concentration
of coolant is used. Refer ...