Manually Folding Third Row Seats — If Equipped

1. Lower the center head restraint down to the seatback by pushing the button on the guide and pushing the head restraint down.

2. Lower the outboard head restraints by pulling on the release strap marked “1” located on the outboard side of the head restraint.

Head Restraint Release Strap “1”
Head Restraint Release Strap “1”

3. Pull release strap marked “2” located on the rear of the seat to lower the seatback.

Release Strap “2”
Release Strap “2”

4. Pull release strap marked “3” to release the anchors.

Release Strap “3”
Release Strap “3”

5. Pull release strap marked “4” and tumble the seat rearward into the storage bin.

Release Strap “4”
Release Strap “4”

Stowed Third Row Seat
Stowed Third Row Seat

See also:

Synthetic Engine Oils
You may use synthetic engine oils provided the recommended oil quality requirements are met, and the recommended maintenance intervals for oil and filter changes are followed. ...

Seat Belt Maintenance
Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use MOPAR Total ...

Transmission Fluid And Filter Changes
Refer to the “Maintenance Schedule” for the proper maintenance intervals. In addition, change the fluid and filter if the transmission is disassembled for any reason. ...