Manual Reclining Seats — If Equipped
For models equipped with manual reclining seats, the recline lever is located on the outboard side of the seat.
Manual Recline Lever
To recline, lean forward slightly, lift the lever, then push back to the desired position and release the lever. Lean forward and lift the lever to return the seatback to its normal position. Using body pressure, lean forward and rearward on the seat to be sure the seatback has latched.
WARNING!
Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest.
In a collision you could slide under the seat belt,
which could result in serious injury or death.
See also:
Tilting The Seat Up Or Down
The angle of the seat cushion can be adjusted in four
directions. Pull upward or push downward on the front
or rear of the seat switch, the front or rear of the seat
cushion will move in the dir ...
Cruise Control
Press and release the UP or DOWN button until ACC (if
equipped with Adaptive Cruise Control) or Cruise is
highlighted in the EVIC. Status of the ACC or Cruise is
displayed in the menu line also. ...
Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition switch to the ON/RUN position (Do
not start the engine.)
2. Fully depress the accelerator pedal, slowly, three times
within 10 seconds.
3. Turn the ignition switch to the O ...