Turning Confirmation Prompts ON/OFF


 

Turning confirmation prompts off will stop the system from confirming your choices (e.g., the Uconnect™ Phone will not repeat a phone number before you dial it).

• Press the • After the “Ready” prompt and the following beep, say button to begin.
• After the “Ready” prompt and the following beep, say one of the following:
− “Setup Confirmation Prompts On”
− “Setup Confirmation Prompts Off”

    See also:

    Service TPMS Warning
    If a system fault is detected, the TPM Telltale Light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. In addition, the EVIC will display a ...

    RW/FF
    Press and hold the FF (Fast Forward) button and the CD player will begin to fast forward until FF is released, or RW or another CD button is pressed. The RW (Reverse) button works in a similar m ...

    Daytime Running Lights (DRL)
    The LED Daytime Running Lights will come on whenever the ignition is placed in the RUN position, the headlights are off and the parking brake is off. The headlight switch must be used for normal ...