To Disengage the Child Protection Door Lock


 

1. Open the sliding side door.

2. Slide the Child Protection Door Lock control outward (away from the vehicle) to disengage the Child Protection Door Lock.

3. Repeat Steps 1 and 2 on the opposite sliding door (if equipped).

NOTE:
• After setting the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position.
• The power sliding side door switches will not open the power sliding doors if the vehicle is in gear or the vehicle speed is above 0 mph (0 km/h).
• The power sliding door will operate from the outside door handle, the RKE transmitter, the switches on the overhead console, or the switches located on the trim panel just in front of the power sliding door when the shift lever is in PARK, regardless of the child lock lever position.

    See also:

    200 convertible
    The 200 convertible weighs about 425 pounds more than the sedan — no small amount — and it shows. Our test car's V-6, which Chrysler expects to power some 90 percent of convertibles, pulled we ...

    Flowing/Rising Water
    WARNING! Do not drive on or across a road or path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to ...

    Active Head Restraints — Front Seats
    The front driver and passenger seats are equipped with Active Head Restraints (AHR). In the event of a rear impact the AHRs will automatically extend forward minimizing the gap between the back ...