REVERSE


 

This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop.

    See also:

    Customer Key Programming
    You can program new keys to the system if you have two valid Sentry Keys by performing the following procedure: 1. Cut the additional Sentry Key Transponder blank(s) to match the ignition switch ...

    Automatic Transmission
    The shift lever must be in the NEUTRAL or PARK position before you can start the engine. Apply the brakes before shifting into any driving gear. CAUTION! Damage to the transmission may occur if ...

    Coolant Checks
    Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or rusty in appearance, the sys ...